View CXP750000_300748.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CXP750000
CMOS 8-bit Single Chip Microcomputer
Description The CXP750000 is a CMOS 8-bit single chip microcomputer of piggyback/evaluator combined type, which is developed for evaluating the function of the CXP750096/750010. Note that the CXP750000 corresponds to the custom font.
Piggy/evaluation chip
64 pin PQFP (Ceramic)
64 pin PSDIP (Ceramic)
Features * A wide instruction set (211 instructions) which covers various types of data - 16-bit operation/multiplication and division/ Boolean Structure bit operation instructions Silicon gate CMOS IC * Minimum instruction cycle 167ns at 24MHz operation 250ns at 16MHz operation 122s at 32kHz operation * Applicable EPROM CXP27C702K (Maximum 120K bytes are available.) * Incorporated RAM 2496 bytes (Excludes VRAM for on-screen display ) * EPROM for custom font 57K bytes * Peripheral functions - A/D converter 8 bits, 6 channels, successive approximation method (Conversion time of 3.25s at 16MHz) - Serial interface 8-bit clock sync type, 1 channel - Timer 8-bit timer 8-bit timer/counter 19-bit time-base timer 32kHz timer/counter - On-screen display (OSD) 24 x 32 dots, 512 character types, 15 character colors, 32 characters x 2 lines frame background 8 colors/half blanking background on full screen 15 colors/half blanking edging/shadowing/rounding for every line background with shadow for every character, double scanning sprite OSD; 24 x 32 dots, 1 screen, 8 colors for every dot - I2C bus interface - PWM output 8 bits, 8 channels 14 bits, 1 channel - Remote control unit receive circuit 8-bit pulse measurement counter, 6-stage FIFO - HSYNC counter 2 channels - Watchdog timer * Interruption 13 factors, 13 vectors, multi-interruption possible * Standby mode Sleep * Package CXP750000 64-pin ceramic PQFP/PSDIP (Supports custom font) Note) Mask option depends on the type of the CXP750000. Refer to the Product List for details.
Perchase of Sony's I2C components conveys a licence under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specifications as defined by Philips. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
-1-
E98613-PS
CXP750000
CXP750000 Pin Assignment in Piggyback Mode (Top View)
PC6/PWM6
PC7/PWM7
PD6/RMC
PD7/EC
PC0
64 PD5/HS1 PD4/HS0 PD3/SI PD2/SO PD1/SCK PD0/INT2 PA7/HSYNC PA6/VSYNC RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 1 2
63 62
61 60 59
PC1
PC2
PC3
PC4
PC5
58
57 56
55
PF0/PWM0
54
53 52 51 50 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G
A12
A15
VDD
A14
A13
PF1/PWM1
PF2/PWM2
49 48 47 46 A8 A9 A11 NC OE A10 CE D7 D6 39 38 37 36 44 43 42 41 40 45 35 34 33
4 5 6 7 8 9 10 11 12 13 14 15 16 A6 A5 A4 A3 A2 A1 A0 NC D0 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21
NC
A7
3
D1
17 18 19 20 21 22 23
GND
A16
D2
D3
D4
D5
24
25 26
27
28 29 30
31 32
Note) 1. NC (Pin 40) is left open. 2. Vss (Pins 10 and 42) are both connected to GND. -2-
PG/7INT1
PG6
PG5
PG4
PG3
PB6
PB5
PB4
PB3
PB2
PB1
PB0
R
CXP750000
CXP750000 Pin Assignment in Evaluator Mode (Top View)
PC6/PWM6
PC7/PWM7
PD6/RMC
PD7/EC
PC0
64 PD5/HS1 PD4/HS0 PD3/SI PD2/SO PD1/SCK PD0/INT2 PA7/HSYNC PA6/VSYNC RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 1 2
63 62
61 60 59
PC1
PC2
PC3
PC4
PC5
58
57 56
55
PF0/PWM0
54
53 52 51 50 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G
A7/D7
A12
A15
VDD
A14
A13
PF1/PWM1
PF2/PWM2
49 48 47 46 A8 A9 A11 NC HALT A10 E/P I/T MON 39 38 37 36 44 43 42 41 40 45 35 34 33
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 A6/D6 A5/D5 A4/D4 A3/D3 A2/D2 A1/D1 A0/D0 NC RD 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21
NC
3
SYNC
GND
RST
WR
A16
C2
C1
Note) 1. NC (Pin 40) is left open. 2. Vss (Pins 10 and 42) are both connected to GND. -3-
PG7/INT1
PG6
PG5
PG4
PG3
PB6
PB5
PB4
PB3
PB2
PB1
PB0
R
CXP750000
CXP750000 Pin Assignment in Piggyback Mode (Top View)
PC3 PC2 PC1 PC0 PD7/EC PD6/RMC PD5/HS1 PD4/HS0 PD3/SI PD2/SO PD1/SCK PD0/INT2 PA7/HSYNC PA6/VSYNC RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 PB6 PB5 PB4 PB3 PG7/INT1 PG6 PG5
1 2 3 4 5 6 7 8 9 10
64 63 62 61 60 59 58 57 56 55
PC4 PC5 PC6/PWM6 PC7/PWM7 PF0/PWM0 PF1/PWM1 PF2/PWM2 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G R PB0 PB1 PB2 PG3 PG4
A12
A15
VDD
A14
A13
NC
A7
11 12 13 14 15 16 17 18 19 20 21 A6 A5 A4 A3 A2 A1 A0 NC D0 5 6 7 8 9 10 11 12 13
54 53
4
3
2
1 32 31 30 29 28 27 26 A8 A9 A11 NC OE A10 CE D7 D6
52 51 50 49 48 47 46 45 44
For programming
25 24 23 22 21
14 15 16 17 18 19 20
GND
A16
D2
D3
D1
23 24 25 26 27 28 29 30 31 32
D4
D5
22
43 42 41 40 39 38 37 36 35 34 33
Note) 1. NC (Pin 46) is left open. 2. Vss (Pins 16 and 48) are both connected to GND. -4-
CXP750000
CXP750000 Pin Assignment in Evaluator Mode (Top View)
PC3 PC2 PC1 PC0 PD7/EC PD6/RMC PD5/HS1 PD4/HS0 PD3/SI PD2/SO PD1/SCK PD0/INT2 PA7/HSYNC PA6/VSYNC RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 PB6 PB5 PB4 PB3 PG7/INT1 PG6 PG5
1 2 3 4 5 6 7 8 9
64 63 62 61 60 59 58 57 56
PC4 PC5 PC6/PWM6 PC7/PWM7 PF0/PWM0 PF1/PWM1 PF2/PWM2 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G R PB0 PB1 PB2 PG3 PG4
A7/D7
A12
A15
NC
VDD
A14
A13
10 11 12
55 54 53
4 13 14 15 16 17 18 19 20 21 A6/D6 A5/D5 A4/D4 A3/D3 A2/D2 A1/D1 A0/D0 NC RD 5 6 7 8 9 10 11 12 13
3
2
1 32 31 30 29 28 27 26 A8 A9 A11 NC HALT A10 E/P I/T MON 49 48 47 46 45 44 52 51 50
For programming
25 24 23 22 21
14 15 16 17 18 19 20
SYNC
GND
RST
WR
A16
C2
C1
22 23 24 25 26 27 28 29 30 31 32
43 42 41 40 39 38 37 36 35 34 33
Note) 1. NC (Pin 46) is left open. 2. Vss (Pins 16 and 48) are both connected to GND. -5-
CXP750000
EPROM Read Timing (Ta = -20 to +75C, VDD = 4.5 to 5.5V, Vss = 0V) Item Address data input delay time Address data hold time Symbol Pins A0 to A16 D0 to D7 A0 to A16 D0 to D7 0 Min. Max. 75 Unit ns ns
tACC tIH
0.8VDD A0 to A16 Address data 0.2VDD tACC tIH 0.8VDD Input data 0.2VDD
D0 to D7
Product List Products Optional item Mask ROM CXP750096 Package ROM capacity Reset pin pull-up resisto Font data CXP750010 Piggy/evaluation chip CXP750000-U01Q CXP750000-U01S 64-pin ceramic PQFP 64-pin ceramic PSDIP
64-pin plastic SDIP/QFP 96K bytes 120K bytes
EPROM 120K bytes Existent EPROM 57K bytes
Existent/Non-existent User data
-6-
CXP750000
CXP750000 Piggyback mode and evaluator mode can be switched as shown below.
Piggyback mode
Evaluator mode
LCC type EPROM
CXP750000
CPU probe Pin 1 marking
Pin 1 index EPROM Pin 1 marking
Note)
Pin 1 index Note) Evaluation cap should be connected to the CPU probe.
-7-
CXP750000
Piggy/Evaluation Chip Corresponds to Custom Font The CXP750000 is a piggy/evaluation chip which corresponds to custom font. This incorporates EPROM of OSD font data block. This IC is shipped in blank status, and write to EPROM using exclusive write adaptor. Use exclusive font editor (SFE700II) as for generating font data. Write mode Write voltage Write pulse width Write ROM type Starting address for write Ending address for write Write adaptor1 1 SUNHAYATO Corp. made 12.75V 100s 27C020 20000h 38BFFh SDIP: SEK7500P10-64S (Upper board) QFP: SEK750000-64Q (Upper board) Lower board: SEK-32DP-DWN2 Intel method
OSD Font Data Block Memory Map
20000h OSD character (lower) 24000h OSD character (medium) 28000h OSD character (upper) 2C000h Unused 2
30000h 30C00h 34000h 34C00h 38000h 38C00h
Graphic character (lower)
Unused
Graphic character (medium)
2
Unused
Graphic character (upper)
2
Unused 3FFFFh 2 Fill up ROM writer memory with FFh.
-8-
CXP750000
Package Outline
Unit: mm
64PIN PQFP (CERAMIC)
PIN No. 1 INDEX INDEX 64 18.7 0.5 16.3 0.2 52 52 64 PIN No.1 INDEX
1
51
51
1
1.0 0.05
4.5
22.3 0.25
24.7 0.5
1.27 0.13
0.4 0.08
0.3
18.12 0.2
12.02
14.22
6.0
1.05
0.7
33
19
19
33
1.3 0.3
0.75
20 9.48 11.66 15.58 0.2
32
32 0.6 0.9
20
PACKAGE STRUCTURE
PACKAGE MATERIAL SONY CODE EIAJ CODE JEDEC CODE PQFP-64C-L02 AQFP064-C-0000-B LEAD TREATMENT LEAD MATERIAL PACKAGE WEIGHT CERAMIC GOLD PLATING 42 ALLOY 5.2g
3.57 0.36
+ 0.05 0.15 - 0.02
9.8 MAX
-9-
CXP750000
Package Outline
Unit: mm
64PIN PSDIP(CERAMIC)
58.90 0.55 18.12 0.2 64 20.0 0.2 33
18.75 0.25
1 PIN 1 INDEX 1.27 0.13
32
1.27 0.25
0.46 0.08 0.9
1.778 0.1
PACKAGE STRUCTURE
PACKAGE MATERIAL SONY CODE EIAJ CODE JEDEC CODE PSDIP-64C-03 ADIP064-C-0750 LEAD TREATMENT LEAD MATERIAL PACKAGE MASS CERAMIC GOLD PLATING 42 ALLOY 19.2g
- 10 -
3.43 0.38
11.24 MAX
+ 0.05 0.25 - 0.02
19.05 0.25
15.85 0.2
17.5 0.17

▲Up To Search▲

Price & Availability of CXP750000

	To Download CXP750000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .